109
HYDRAULIC SYSTEM
F_02_H15 F_02_71 F_02_124
CONTROL PANEL LOCATION - HYD-
RAULIC WITH MECHANICAL CON-
TROL SYSTEM
Electro-hydraulic control panel (1) is lo-
cated on the upper part of right fender.
Description of hydraulic control is men-
tioned in chapter – hydraulic with me-
chanical control systém
OUTER HYDRAULIC CIRCUIT
It supplies pressure oil for the hydraulic
appliances connected to the outer out-
lets of the hydraulic system fitted with
quick couplers. The rear and front quick
coupler plugs (A and B respectively) in-
ner diameter is 12,5 mm and they com-
ply with the international ISO 5675 stan-
dard.
QUICK COUPLERS COUPLING AND
UNCOUPLING
When coupling and uncoupling the
quick couplers be very careful be-
cause of the residual oil, which
remains in the socket or in the
plug of the quick coupler.
For the ecological reasons this
residual oil has to be removed
with any cloth after each un-
coupling of the quick couplers.
To Next Page
Loading...
