169
HINTS FOR MAINTENANCE
F_02_88 F_02_89 F_02_90
DISASSEMBLY AND REGENERATION
OF THE MAIN CARTRIDGE
- Loosen and remove the nut fixing the
main cartridge
- Remove the main cartridge
If the main cartridge is not damaged
(there is no dust in the cartridge inner
side) regenerate if by blowing the com-
pressed air of 700 kPa as maximum
from inside. Such regeneration may be
performed 3 times as maximum.
Replace the cartridge once a year.
DISASSEMBLY OF THE LOCKING
INSERT
- Loosen and remove the nut fixing the
position of the locking insert
To Next Page
Loading...
