Zetor 117 41 forterra turbo - Setting-Up Operations; Setting Operations

187
SETTING-UP OPERATIONS
Since most of the following operations
require some experience and more de-
manding service and diagnostic equip-
ment, it is recommended to entrust them
to the professional or authorized work-
shops.
Page
Inspecting the tension of engine belt ......................................................................188
∗ Inspecting the tension of aircondition compressor belt........................................ 188
Inspecting the tension of engine belt Z 11741 ........................................................188
Tightening the head of cylinders .............................................................................188
Setting up the valve clearance Z 8641 - Z 11441....................................................189
Setting up the valve clearance Z 11741..................................................................189
Setting-up the injectors Z 8641 - Z 11441...............................................................189
Setting up the injectors Z 11741 .............................................................................190
Setting up the brake pedal dead motion .................................................................190
Tractor brake system bleeding................................................................................190
Bleeding the rear brake system ..............................................................................191
Setting up the clutch pedal dead motion.................................................................192
Bleeding the clutch hydraulic circuit........................................................................192
Bleeding the front propeller shaft brake..................................................................193
Checking the foot brake for proper setting-up.........................................................193
Setting up the foot brake.........................................................................................194
Setting-up the parking brake...................................................................................194
Replacing the front propeller shaft braking segments.............................................195
Setting up the lifting tie rods for the single-axle trailer ............................................195
Setting the Bowden cable .......................................................................................195
Calibrating the digital dashboard travel speed........................................................196