170
HINTS FOR MAINTENANCE
F_02_91 F_02_104 F_02_108
- Remove the locking insert
The locking insert may not be re-
generated!
It must be inevitably replaced in the fol-
lowing cases:
- When the main cartridge is damaged
- After 5 maintenance operations of the
air cleaner
- At least once every two years
REPLACING THE CARTRIDGES
When replacing the cartridges pay at-
tention to:
- The cleanness of the contact surfaces
in the outlet neck socket
- Avoidance of any distortion of the car-
tridge during the replacement
- Vibration-free operation of the car-
tridge and the blade wheel partition
after the replacement
- Proper seating of the rubber gasket at
the jacket shoulder.
POSITION OF THE DISCHARGE
MOUTH
After replacing the cartridges close the
cleaner with the cleaned dust trap, which
must be placed with the discharge
mount aiming downwards.
To Next Page
Loading...
