127
ELECTRO-HYDRAULIC SYSTEM
F_02_162 F_02_188
FUNCTIONS OF THE CONTROLS
1. Switching the lifting system
a - Transport, lifting
b - Stop position
c - Regulation, lowering (working)
d - Free position, fast dipping (the spring return the lever back to the position c)
2. Blocking in the transport position
3. Lowering rate
4. Setting the required value of the lifting device position
5. Upper position limitation
6. Smooth setting from the dynamometric to the positional regulation
7. LED - diagnostic
8. LED – lifting
9. LED – lowering
10. Turning on the compensator (swing compensator)
11. LED – swing compensator is on
DEVICE SWITCHED OFF
Electric installation switched off with the
switch box key. The electronic system is
switched off, the lifting device is blocked.
To Next Page
Loading...
