45
TRACTOR SURVEY
F73 F74 F_02_213
P.T.O. SHAFT DEPENDENT AND
INDEPENDENT REVOLUTIONS
SHIFTING LEVER
Th lever is located at the R.H. side of the
driver’s seat
P. T. O . -
P.T.O. shaft independent
revolutions engaged
N -
Neutral position
Used for easier coupling of
the agricultural implement
propeller shaft.
The rear P.T.O. shaft tail is
free to turn
PTO
synchro -
P.T.O. dependent revolu-
tions engaged (The revolu-
tions depending on the
tractor travel speed)
HAND-OPERATED BRAKE LEVER
AND TWO-WHEEL TRAILER HITCH
CONTROL LEVER
1 - Hand-operated brake lever
a - Brake released
b - Brake applied
2 - Two-wheel trailer hitch control lever
a - Transport position
b - Supporting hooks are tilted out,
towing hook may be lowered
HYDRAULIC CONTROL PANEL
LOCATION
Hydraulic control panel is located on the
upper part of right fender.
a - hydraulic with mechanical control
systém
b - electro-hydraulic systém Bosch
Description of hydraulic control is men-
tioned in chapter – hydraulic with me-
chanical control systém (a), electro-
hydraulic systém (b).
To Next Page
Loading...
