176
HINTS FOR MAINTENANCE
F_02_118 F_02_136
DRAIN HOLES AND PLUGS
Pos.. Hole – plug
1 - Oil from clutch box
2 - Oil from the gearbox
3,4,5 - Oil from final drive box
CHECKING AND EXCHANGING OIL IN THE GEARBOX
If necessary, replenish the oil up to the upper border of the dipstick flat (1), or to
some of the marks depending on the class of job the tractor is employed. For meas-
uring the oil level in the gearbox, stop the engine and insert the plug dipstick fully
into the tube mouth.
Level in the gear-
box
Tractor employment
A
minimum Standard operation
B normal
Standard operation
C
+7 l (increased) Operation in a slope
D
+15 l - maximum Aggregation of machines with high oil takeoff
The filling hole for the transmission oil (2) is placed in the hydraulic system cover..
Accessible from the tractor rear side.
To Next Page
Loading...
