138
HITCHES
REAR THREE-POINT HITCH
The rear three-point hitches serve for
connecting the attached or semi-
attached agricultural machines and im-
plements of the category II as per ISO
standard. Spacing of the centers of balls
of the hitch hinges is 870 mm. Diameters
of the lower hitch hinges is 28,5 mm. Di-
ameter of the upper hitch hinge is 25,5
mm.
A - Rear three-point hitch
B - Rear three-point hitch fitted with
CBM terminals
1. Upper tie rod
2. Left lifting tie rod
3. Right lifting tie rod
4. Lower tie rods of the three-point hitch
When setting the lifting tie rods
(2,3) to the maximum length
avoid exceeding the maximum
admissible unscrewing of the
bolts of the lower forks from the
tubes! For the left and right lifting
tie rods these values equal
85 mm and 45 mm respectively.
F_02_157
To Next Page
Loading...
