129
ELECTRO-HYDRAULIC SYSTEM
F_02_165 F_02_166 F_02_167
FAST DIPPING
Lever (1) in the position "d" – i.e. the free
position. The lever must be kept in this
position, because when released, it gets
the position "c" – system operating in
accordance with the setting-up of the
controllers (3), (4), (5), and (6).
IMPLEMENT TRANSPORTATION
Shift the lifting lever (1) to the position
”a” and block the traverse lock (2).
Blocking the lifting lever (1) in position
"a" by a movable lock (2):
A - moving the lever is blocked
B - moving the lever is not blocked
When the tractor is stopped with
the implements attached, lower
the implements to the ground (do
not leave it with the implements
in the lifted position).
STOP POSITION
When shifting the lever (1) to the posi-
tion "b" - stop position, the three-point
hitch stops moving immediately.
To Next Page
Loading...
