15
PREVENTIVE DAILY MAINTENANCE
F_02_192 F_02_193 F_02_3a
FUEL SYSTÉM TIGHTNESS
Check the fuel system, including the fuel
tank, for tightness. Correct all leaks im-
mediately. The drain-out plug for impuri-
ties in the tanks is placed in the tank
bottom.
ENGINE OIL LEVEL
On unscrewing and removing the oil
dipstick, check the oil for level and the
engine lubrication system connections
for tightness. Keep the oil level between
the dipstick marks,
COOLING SYSTEM
Check the engine cooling system con-
nections for tightness and for the amount
of cooling liquid. In case of need com-
plete to MAX. The minimum admissible
level shall reach the bottom mark of the
cooling liquid gage.
Do not remove the cooling sys-
tem cap until the liquid is cold
enough otherwise danger of
scalding is imminent.!
To Next Page
Loading...
