188
ADJUSTMENT
E751
TENSIONING THE V-BELT
If the V-belt is properly tensioned - its de-
flection must be 5.5 mm when one belt is
subject to the force of 25 N.
Tension the V-belt to the prescribed
value after releasing the fixation screws
of the alternator (1, 2)
∗TENSIONING THE V-BELT OF THE
AC COMPRESSOR
If the V-belt is properly tensioned - its de-
flection must be 7.5 mm when the belt is
subject to the force of 25 N.
Tension the V-belt to the prescribed
value after releasing the fixation screws
of the AC compressor.
To Next Page
Loading...
