92
TRANSPORTATION
E307 E308 E312
SWINGING DRAW-BAR CONSOLE
WITH A FIXED PIN MODULE
Perform the assembly and disassembly
of the swinging draw-bar in accordance
with the “Swinging draw-bar” chapter.
Connecting the shaft lug to the fixed pin
(3):
1. Release and remove the pin (1).
2. Lift the locking wedge (2) in the ar-
row direction.
3. Connect the shaft lug to the fixed pin
(3):
4. Return the locking wedge (2) to the
original position and secure it with
the pin (1).
CONSOLE WITH A Ø 80 BALL
MODULE
The console with a ø 80 ball is
only used to connect semi-trailers
with a hitching device designed
for a ø 80 ball.
Releasing the hitch, fig. (A):
By moving the lever (1) in the arrow di-
rection you will remove the locking
wedge (2).
Locking the hitch, fig. (B):
By moving the lever (1) in the arrow di-
rection you will retract the locking wedge
(2).
TOWING BAR
It is height adjustable by the hydraulic
lifting mechanisms in the whole lifting
range. Only such agricultural machines
can be connected to the towing bar that
permanently load it downwards.
During work with the towing bar
disassemble the stage hitch a
swinging draw-bar.
To Next Page
Loading...
