Zetor PROXIMA POWER Z90 2012 - Change of the Load Capacity of the Rear Tyres; Load Capacity of the Rear Tyres

206
MAIN TECHNICAL PARAMETERS
LOAD CAPACITY OF THE REAR TYRES
Travelling speed
40 km.h
-1
30 km.h
-1
20 km.h
-1
8 km.h
-1
Tyre loading
(kg)
Tyre loading
(kg)
Tyre loading
(kg)
Tyre loading
(kg)
Tyre dimen-
sions
1 tyre
Axle
Inflation
(kPa)
1
tyre
Axle
Inflation
(kPa)
1 tyre
Axle
Inflation
(kPa)
1 tyre
Axle
Inflation
(kPa)
16,9-30
8PR
1850 3700 170 2300 4600 170 2760 5000
170 2885 5500
140
16,9R30
2500 5000 160 2680 5000 160 2680 5000
160 3000 5500
140
480/70R30
2575 5000 160 2530 5000 140 2570 5000
120 2860 5500
100
18,4-30
8PR
1950 3900 140 2430 4860 140 2665 5000
120 3110 5500
120
18,4R30
2545 5000 150 2600 5000 140 2500 5000
110 2750 5500
90
16,9-34
8PR
1950 3900 170 2430 4860 170 2580 5000
140 3010 5500
140
16,9R34
2650 5000 160 2620 5000 140 2620 5000
140 2890 5500
120
480/70R34
2500 5000 140 2550 5000 130 2570 5000
110 2820 5500
90
540/65R34
2540 5000 120 2510 5000 100 2510 5000 100
2790 5500
80
18,4-34
8 PR
2120 4240 140 2650 5000 140 2615 5000
100 3050 5500
100
18,4R34
2600 5000 120 2530 5000 100 2530 5000
100 3070 5500
100
520/70R34
2680 5000 120 2640 5000 100 2640 5000
100 2930 5500
80
600/65R34
2520 5000 80 2700 5000 80 2700 5000
80 2960 5500
60
13,6-36
6PR
1300 2600 160 1615 3230 160 1940 3880
160 2000 4000
140
Note: (prepared in accordance with technical parameters of Mitas tyres) The load capacity values refer to the rear wheel track
width of 1500 mm and comply with the axle capacity. The inflation values are minimum values adapted to the maximum permis-
sible load capacity of the axles.
During operation on a hard base it is suitable with regard to slippage and abrasion of the tyre to increase the pressure by 30 kPa.
CHANGE OF THE LOAD CAPACITY OF THE REAR TYRES
Travelling speed (km/h) diagonal radial
8 + 40 + 50
20 + 20 + 23
30 0 + 7
40 - 20 0