24
PREVENTIVE DAILY MAINTENANCE
E14 E15 G16
HITCHES
Check the condition of the hitches and
attachments, incl. trailer.
AFTER WORK WITH FRONT
IMPLEMENTS
After work with front implements:
Check the connections of the external
hydraulic circuit of the control of the
front three-point hitch
Clogging of the coolers:
1. Open the hood.
2. Release and remove the air-conditi-
oning condenser to the left side of the
tractor.
3. Clean the front walls of the engine
(air-conditioning condenser) cooler
with compressed air (blow air in the
direction from the engine).
4. Remove residual dirt from the space
under the hood (so that it should not
be suctioned again).
SHORT FUNCTIONAL TEST
After starting the engine check whether
the hydrostatic steering failure, engine
lubrication and charging indicators have
gone off.
Verify the function of the hydraulic steer-
ing circuits and check them for leaks.
To Next Page
Loading...
