Section 5.0
MAN 06–0017H ZIEHM QUANTUM User’s Manual Page 48 of 220
Fig 5.1 Mobile Stand transport positioning
WARNING:
The monitors must be placed in the transport position with all locks engaged
before transporting the ZIEHM QUANTUM C-arm mobile stand.
Failure to lock all the ZIEHM QUANTUM c-arm locks and monitor support
arm pivot locks as show in Fig 5.2 may result in serious injury to patient or
operator.
CAUTION
System should never be operated on floors with an inclination greater than 5°
from level. This applies to the C-arm stand with the monitors in the locked
operational position. The system must be in the proper operating position
before use.
Exercise extreme caution when moving the mobile C-arm stand that the cable
guards do not drag and the wheels do not catch or tilt causing damage to the
equipment.
To Next Page
Loading...
Need help?
General