ZKTeco SpeedFace-V5L TI User Manual

SpeedFace-V5L [TI] User Manual
Page | 9 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
3 Instruction for Use
Before getting into the Device features and its functions, it is recommended to be familiar to the below
fundamentals.
Finger Positioning 3.1
Recommended fingers: It is recommended to use index, middle, or ring finger for registration and avoid
using the thumb or pinky, as they are difficult to accurately press onto the fingerprint reader.
NOTE: Please use the correct method when pressing your fingers onto the fingerprint reader for
registration and identification. Our company will assume no liability for recognition issues that may result
from incorrect usage of the product. We reserve the right of final interpretation and modification
concerning this point.
Standing Position, Posture and Facial Expression 3.2
 The recommended distance
Too close to the edge
Vertical
Too low
The distance between the device and a user whose height is
in a range of 1.55m-1.85m is recommended to be 0.3-2.5m.
Users may slightly move forward or backward to improve
the quality of facial images captured.

ZKTeco SpeedFace-V5L TI Specifications

General

Device Type	IP Access Controller
Model	SpeedFace-V5L TI
Fingerprint Capacity	10, 000
Card Capacity	10, 000
RFID Capacity	10, 000
Transaction Capacity	200, 000
Logs Capacity	200, 000
Display	5-inch Touch Screen
Wiegand Signal	Wiegand Input/Output
Temperature Detection	Yes
Palm Capacity	3, 000
Communication	TCP/IP, Wi-Fi
Interfaces	RS485, USB Host
Authentication Method	Face, Palm, Card, Fingerprint, Password
Face Recognition Speed	<0.3s
Power Supply	12V 3A
Face Capacity	6, 000 (1:N)