ZKTeco SpeedFace-V5L TI User Manual

SpeedFace-V5L [TI] User Manual
Page | 35 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
NOTE: The process of editing the user information is the same as that of adding a new user, except that
the User ID cannot be modified when editing a user. The process in detail refers to "5.1 User Management".
Delete User 5.4
On All Users interface, tap on the required user from the list and tap Delete to delete the user or a specific
user information from the device. On the Delete interface, tap on the required operation and then tap OK
to confirm the deletion.
Delete Operations
Delete User: Deletes all the user information (deletes the selected User as a whole) from the Device.
Delete Fingerprint Only: Deletes the fingerprint information of the selected user.
Delete Password Only: Deletes the password information of the selected user.
Delete Face Only: Deletes the Face information of the selected user.

ZKTeco SpeedFace-V5L TI Specifications

General

Device Type	IP Access Controller
Model	SpeedFace-V5L TI
Fingerprint Capacity	10, 000
Card Capacity	10, 000
RFID Capacity	10, 000
Transaction Capacity	200, 000
Logs Capacity	200, 000
Display	5-inch Touch Screen
Wiegand Signal	Wiegand Input/Output
Temperature Detection	Yes
Palm Capacity	3, 000
Communication	TCP/IP, Wi-Fi
Interfaces	RS485, USB Host
Authentication Method	Face, Palm, Card, Fingerprint, Password
Face Recognition Speed	<0.3s
Power Supply	12V 3A
Face Capacity	6, 000 (1:N)