ZKTeco SpeedFace-V5L TI User Manual

SpeedFace-V5L [TI] User Manual
Page | 11 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Face Registration 3.4
Try to keep the face in the centre of the screen during registration. Please face towards the camera and
stay still during face registration. The screen should look like this:
Correct face registration and authentication method
 Recommendation for registering a face
 When registering a face, maintain a distance of 40cm to 80cm between the device and the
face.
 Be careful not to change your facial expression. (smiling face, drawn face, wink, etc.)
 If you do not follow the instructions on the screen, the face registration may take longer or
may fail.
 Be careful not to cover the eyes or eyebrows.
 Do not wear hats, masks, sunglasses, or eyeglasses.
 Be careful not to display two faces on the screen. Register one person at a time.
 It is recommended for a user wearing glasses to register both faces with and without glasses.
 Recommendation for authenticating a face
 Ensure that the face appears inside the guideline displayed on the screen of the device.
 If the glasses have been changed, authentication may fail. If the face without glasses has
been registered, authenticate the face without glasses further. If the face with glasses has
been registered, authenticate the face with the previously worn glasses.

ZKTeco SpeedFace-V5L TI Specifications

General

Device Type	IP Access Controller
Model	SpeedFace-V5L TI
Fingerprint Capacity	10, 000
Card Capacity	10, 000
RFID Capacity	10, 000
Transaction Capacity	200, 000
Logs Capacity	200, 000
Display	5-inch Touch Screen
Wiegand Signal	Wiegand Input/Output
Temperature Detection	Yes
Palm Capacity	3, 000
Communication	TCP/IP, Wi-Fi
Interfaces	RS485, USB Host
Authentication Method	Face, Palm, Card, Fingerprint, Password
Face Recognition Speed	<0.3s
Power Supply	12V 3A
Face Capacity	6, 000 (1:N)