ZKTeco SpeedFace-V5L TI User Manual

SpeedFace-V5L [TI] User Manual
Page | 43 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Advanced Setting
On the Wireless Network interface , tap on Advanced to set the relevant parameters as required.
Function Description
Function Name Description
DHCP
Dynamic Host Configuration Protocol (DHCP) dynamically allocates IP addresses
to network clients. If the DHCP is enabled, then the IP cannot be set manually.
IP Address
IP address for the WIFI network
, the default is 0.0.0.0. It can be modified
according to the network availability.
Subnet Mask
The default Subnet Mask of the WIFI network is 255.255.255.0. It can be modified
according to the network availability.
Gateway
The default Gateway address is 0.0.0.0. Can be modified according to the network
availability.
Cloud Server Setting 7.5
Tap Cloud Server Setting on the Comm. Settings interface to connect with the ADMS server.

ZKTeco SpeedFace-V5L TI Specifications

General

Device Type	IP Access Controller
Model	SpeedFace-V5L TI
Fingerprint Capacity	10, 000
Card Capacity	10, 000
RFID Capacity	10, 000
Transaction Capacity	200, 000
Logs Capacity	200, 000
Display	5-inch Touch Screen
Wiegand Signal	Wiegand Input/Output
Temperature Detection	Yes
Palm Capacity	3, 000
Communication	TCP/IP, Wi-Fi
Interfaces	RS485, USB Host
Authentication Method	Face, Palm, Card, Fingerprint, Password
Face Recognition Speed	<0.3s
Power Supply	12V 3A
Face Capacity	6, 000 (1:N)