ZKTeco SpeedFace-V5L TI User Manual

SpeedFace-V5L [TI] User Manual
Page | 25 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
3.7.5 Combined Verification
To increase security, this device offers the option of using multiple forms of verification methods. A total of
15 different verification combinations can be used, as shown below:
Combined Verification Symbol Definition
Symbol Definition Explanation
/
or
This method
compares the entered verification of a person with the related
verification template previously stored to that Personnel ID in the Device.
+
and
This method compares the entered verification of a person with all the verification
template previously stored to that Personnel ID in the Device.
Procedure to set for Combined Verification Mode
• Combined verification requires personnel to register all the different verification method.
Otherwise, employees will not be able to successfully verify the combined verification process.
• For instance, when an employee has registered only the fingerprint data, but the Device
verification mode is set as “Fingerprint + Password”, the employee will not be able to complete the
verification process successfully.
• This is because the Device compares the scanned fingerprint template of the person with
registered verification template (both the Fingerprint and the Password) previously stored to that
Personnel ID in the Device.

ZKTeco SpeedFace-V5L TI Specifications

General

Device Type	IP Access Controller
Model	SpeedFace-V5L TI
Fingerprint Capacity	10, 000
Card Capacity	10, 000
RFID Capacity	10, 000
Transaction Capacity	200, 000
Logs Capacity	200, 000
Display	5-inch Touch Screen
Wiegand Signal	Wiegand Input/Output
Temperature Detection	Yes
Palm Capacity	3, 000
Communication	TCP/IP, Wi-Fi
Interfaces	RS485, USB Host
Authentication Method	Face, Palm, Card, Fingerprint, Password
Face Recognition Speed	<0.3s
Power Supply	12V 3A
Face Capacity	6, 000 (1:N)