ZKTeco SpeedFace-V5L TI User Manual

SpeedFace-V5L [TI] User Manual
Page | 79 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
13 Autotest
On the Main Menu, tap Autotest to automatically test whether all modules in the device function
properly, which include the LCD, Voice, Fingerprint Sensor, Camera and Real-Time Clock (RTC).
Function Description
Function Name
Description
Test All
To automatically test whether the LCD, Audio, Camera and RTC are normal.
Test LCD
To automatically test the display effect of LCD screen by displaying full-
color, pure white, and pure black to check whether the screen displays
colors normally.
Test Voice
To automatically test whether the audio files stored in the device are
complete and the voice quality is good.
Test Fingerprint Sensor
To test the fingerprint sensor by pressing a finger on the scanner to check if
the acquired fingerprint image is clear.
When you are pressing a finger on
the scanner, the fingerprint image will display on the screen.
Test Face
To test if the camera functions properly by checking the pictures taken to
see if they are clear enough.
Test Clock RTC
To test the RTC
. The device tests whether the clock works normally and
accurately with a stopwatch. Tap
the screen to start counting and press it
again to stop counting.

ZKTeco SpeedFace-V5L TI Specifications

General

Device Type	IP Access Controller
Model	SpeedFace-V5L TI
Fingerprint Capacity	10, 000
Card Capacity	10, 000
RFID Capacity	10, 000
Transaction Capacity	200, 000
Logs Capacity	200, 000
Display	5-inch Touch Screen
Wiegand Signal	Wiegand Input/Output
Temperature Detection	Yes
Palm Capacity	3, 000
Communication	TCP/IP, Wi-Fi
Interfaces	RS485, USB Host
Authentication Method	Face, Palm, Card, Fingerprint, Password
Face Recognition Speed	<0.3s
Power Supply	12V 3A
Face Capacity	6, 000 (1:N)