ZKTeco SpeedFace-V5L TI User Manual

SpeedFace-V5L [TI] User Manual
Page | 85 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Appendix 1
Requirements of Live Collection and Registration of Visible
Light Face Images
1） It is recommended to perform registration in an indoor environment with an appropriate light
source without underexposure or overexposure.
2） Do not place the device towards outdoor light sources like door or window or other harsh light
sources.
3） Dark-color apparels, different from the background color is recommended for registration.
4） Please expose your face and forehead properly and do not cover your face and eyebrows with your
hair.
5） It is recommended to show a plain facial expression. (A smile is acceptable, but do not close your
eyes, or incline your head to any orientation).
6） Two images are required for a person with eyeglasses, one image with eyeglasses and the other
without the eyeglasses.
7） Do not wear accessories like a scarf or mask that may cover your mouth or chin.
8） Please face right towards the capturing device, and locate your face in the image capturing area as
shown in the image below.
9） Do not include more than one face in the capturing area.
10） A distance of 50cm to 80cm is recommended for capturing the image. (the distance is
adjustable, subject to body height).

ZKTeco SpeedFace-V5L TI Specifications

General

Device Type	IP Access Controller
Model	SpeedFace-V5L TI
Fingerprint Capacity	10, 000
Card Capacity	10, 000
RFID Capacity	10, 000
Transaction Capacity	200, 000
Logs Capacity	200, 000
Display	5-inch Touch Screen
Wiegand Signal	Wiegand Input/Output
Temperature Detection	Yes
Palm Capacity	3, 000
Communication	TCP/IP, Wi-Fi
Interfaces	RS485, USB Host
Authentication Method	Face, Palm, Card, Fingerprint, Password
Face Recognition Speed	<0.3s
Power Supply	12V 3A
Face Capacity	6, 000 (1:N)