ZKTeco SpeedFace-V5L TI User Manual

SpeedFace-V5L [TI] User Manual
Page | 60 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Idle Time To Slide
Show (s)
When there is no operation, and the time exceeds the set value, a slide show
will be played. The function can be disabled, or you may set the value between
3 and 999 seconds.
Slide Show Interval
(s)
It is the time interval in switching between different slide show pictures. The
function can be disabled, or you may set the interval between 3 and 999
seconds.
Idle Time to Sleep
(m)
If the sleep mode is activated, and when there is no operation in the device,
then the device will enter standby mode.
Press any key or finger to resume normal working mode. This function can be
disabled or set a value within 1-999 minutes.
Main Screen Style
The main screen style can be selected according to the user preference.
Voice Settings 9.2
Tap Voice on the Personalize interface to configure the voice settings.

ZKTeco SpeedFace-V5L TI Specifications

General

Device Type	IP Access Controller
Model	SpeedFace-V5L TI
Fingerprint Capacity	10, 000
Card Capacity	10, 000
RFID Capacity	10, 000
Transaction Capacity	200, 000
Logs Capacity	200, 000
Display	5-inch Touch Screen
Wiegand Signal	Wiegand Input/Output
Temperature Detection	Yes
Palm Capacity	3, 000
Communication	TCP/IP, Wi-Fi
Interfaces	RS485, USB Host
Authentication Method	Face, Palm, Card, Fingerprint, Password
Face Recognition Speed	<0.3s
Power Supply	12V 3A
Face Capacity	6, 000 (1:N)