ZKTeco SpeedFace-V5L TI User Manual

SpeedFace-V5L [TI] User Manual
Page | 84 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Real-time monitoring on the ZKBioAccess MTD Software 15.4
1. Click Prevention > Epidemic > Temperature Detection > Real-time monitoring to view all the
personnel's events present under the Abnormal Temperature, No Masks, and Normal Records.
The user data of abnormal body temperature is displayed on the Abnormal Temperature
information bar automatically according to the Temperature Threshold Setting is set.
2. Click Epidemic > Temperature Management > Statistics Panel to view the analysis of statistical
data in the form of a pie-chart and view the personnel with normal temperature, abnormal
temperature, and unmeasured body temperature. Also, detailed information of the personnel can
be seen on the right by clicking on the particular category on the pie-chart.
NOTE: For other specific operations, please refer to ZKBioAccess MTD User Manual.

ZKTeco SpeedFace-V5L TI Specifications

General

Device Type	IP Access Controller
Model	SpeedFace-V5L TI
Fingerprint Capacity	10, 000
Card Capacity	10, 000
RFID Capacity	10, 000
Transaction Capacity	200, 000
Logs Capacity	200, 000
Display	5-inch Touch Screen
Wiegand Signal	Wiegand Input/Output
Temperature Detection	Yes
Palm Capacity	3, 000
Communication	TCP/IP, Wi-Fi
Interfaces	RS485, USB Host
Authentication Method	Face, Palm, Card, Fingerprint, Password
Face Recognition Speed	<0.3s
Power Supply	12V 3A
Face Capacity	6, 000 (1:N)