ZKTeco SpeedFace-V5L TI User Manual

SpeedFace-V5L [TI] User Manual
Page | 22 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
After successful verification, the prompt box displays "Successfully verified", as shown below:
If the verification is failed, it prompts “Please adjust your position!”.
3.7.4 Password Verification
The device compares the entered password with the registered password by the given User ID.
Click the button on the main screen to enter the 1:1 password verification mode. Then, input the user
ID and press [OK].

ZKTeco SpeedFace-V5L TI Specifications

General

Device Type	IP Access Controller
Model	SpeedFace-V5L TI
Fingerprint Capacity	10, 000
Card Capacity	10, 000
RFID Capacity	10, 000
Transaction Capacity	200, 000
Logs Capacity	200, 000
Display	5-inch Touch Screen
Wiegand Signal	Wiegand Input/Output
Temperature Detection	Yes
Palm Capacity	3, 000
Communication	TCP/IP, Wi-Fi
Interfaces	RS485, USB Host
Authentication Method	Face, Palm, Card, Fingerprint, Password
Face Recognition Speed	<0.3s
Power Supply	12V 3A
Face Capacity	6, 000 (1:N)