ZKTeco SpeedFace-V5L TI User Manual

SpeedFace-V5L [TI] User Manual
Page | 21 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
 1:1 Facial Verification
In this verification mode, the device compares the face captured by the camera with the facial template
related to the entered user ID. Press on the main interface and enter the 1:1 facial verification mode
and enter the user ID and click [OK].
If the user has registered palm, fingerprint, and password in addition to face, and the verification method
is set to palm/ fingerprint/ face /password verification, the following screen will appear. Select the
icon to enter the face verification mode.

ZKTeco SpeedFace-V5L TI Specifications

General

Device Type	IP Access Controller
Model	SpeedFace-V5L TI
Fingerprint Capacity	10, 000
Card Capacity	10, 000
RFID Capacity	10, 000
Transaction Capacity	200, 000
Logs Capacity	200, 000
Display	5-inch Touch Screen
Wiegand Signal	Wiegand Input/Output
Temperature Detection	Yes
Palm Capacity	3, 000
Communication	TCP/IP, Wi-Fi
Interfaces	RS485, USB Host
Authentication Method	Face, Palm, Card, Fingerprint, Password
Face Recognition Speed	<0.3s
Power Supply	12V 3A
Face Capacity	6, 000 (1:N)