ZKTeco SpeedFace-V5L TI User Manual

SpeedFace-V5L [TI] User Manual
Page | 37 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
• Then, tap on Define User Role and select the required privileges to assign to the new role, and
then tap on the Return button.
• During privilege assignment, the main menu function names will be displayed on the left and its
sub-menus will be listed on its right.
• First tap on the required Main Menu function name, and then select its required sub-menus from
the list.
Note: If the User Role is enabled for the Device, tap on User Mgt. > New User > User Role to assign the
created roles to the required users. But if there is no super administrator registered in the Device, then the
device will prompt "Please enroll super admin first!” when enabling the User Role function.

ZKTeco SpeedFace-V5L TI Specifications

General

Device Type	IP Access Controller
Model	SpeedFace-V5L TI
Fingerprint Capacity	10, 000
Card Capacity	10, 000
RFID Capacity	10, 000
Transaction Capacity	200, 000
Logs Capacity	200, 000
Display	5-inch Touch Screen
Wiegand Signal	Wiegand Input/Output
Temperature Detection	Yes
Palm Capacity	3, 000
Communication	TCP/IP, Wi-Fi
Interfaces	RS485, USB Host
Authentication Method	Face, Palm, Card, Fingerprint, Password
Face Recognition Speed	<0.3s
Power Supply	12V 3A
Face Capacity	6, 000 (1:N)