SpeedFace-V5L [TI]
User Manual
Page | 50 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Function Description
Camera Mode
Whether to capture and save the current snapshot image during verification.
There are 5 modes:
No Photo: No photo is taken during user verification.
Take photo, no save: Photo is taken but is not saved during verification.
Take photo and save: Photo is taken and saved during verification.
Save on successful verification: Photo is taken and saved for each successful
verification.
Save on failed verification: Photo will be taken and saved only for each
failed verification.
Display User Photo
Whether to display the user photo when the user passes the verification.
Access Logs Warning
When the record space of the attendance access reaches
threshold value, the device will automatically display the memory space
warning.
Users may disable the function or set a valid value between 1 and 9999.
Circulation Delete
Access Records
When access records have reached full capacity, the device will automatically
delete a set of old access records.
Users may disable the function or set a valid value between 1 and 999.
Cyclic Delete ATT
Photo
When attendance photos have reached full capacity, the device will
automatically delete a set of old attendance photos.
Users may disable the function or set a valid value between 1 and 99.
Cyclic Delete Blocklist
Photo
When block listed
photos have reached full capacity, the device will
automatically delete a set of old block listed photos.
Users may disable the function or set a valid value between 1 and 99.
Confirm Screen
Delay(s)
The time length of the message of successful verification displays.
Valid value: 1~9 seconds.
Face comparison
Interval (s)
To set the facial template matching time interval as required.
Valid value: 0~9 seconds.
To Next Page
Loading...
Need help?
General
