Need help?Do you have a question about the Zmorph FAB and is the answer not in the manual?
General| Build Volume | 250 x 235 x 165 mm |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Print Speed | up to 100 mm/s |
| Software | Voxelizer |
| Dimensions | 530 x 555 x 480 mm |
| Layer Resolution | 0.05 - 0.3 mm |
| Connectivity | USB, Ethernet |
| Supported Materials | PLA, ABS, PETG, TPU, Nylon |
| Power Supply | 24V DC |
| Print Technology | Fused Filament Fabrication (FFF) |
| Extruder Type | Single Extruder |
| Display | 5-inch capacitive touchscreen |
To Next Page
