zmorph3d.com 7
2. Health and safety at work
Health and safety
accessible moving parts. Caution is advised.
When operating the printer, avoid situations that could cause burns or interfere with the proper
functioning of the device.
of age and persons with reduced manual, motor and psychomotor skills. If the device is operated
by handicapped or elderly people, the Manufacturer recommends using assistance or supervision of
appropriately trained persons.
Do not leave the device unattended during operation, especially when working with the Laser Toolhead.
Regularly check the wear and tear of parts in the machine. The list of spare parts can be found in the
bit.ly/ZmorphFab_Manual
For assistance with technical problems and any maintenance work, please contact the Technical
support.zmorph3d.com
This device is not intended to operate in a potentially explosive atmosphere.
bit.ly/ZmorphFab_Manual
To Next Page
Loading...
