Zmorph FAB - 14. Thick Paste Extruder; 14.1 Safety; 14.2 Material Application

Zmorph Fab - QUICK START GUIDE 38
Thick Paste Extruder
14. Thick Paste Extruder

bit.ly/ZmorphFab_Manual
14.1 Safety
14.2 Material application
   
Extruder.
Unlock the syringe blockade.      
syringe.
Manually move the piston
to the starting position.
Fill the syringe with the
prepared material.

and lock the syringe blockade.