Zmorph FAB - 12. CNC Milling; 12.1 Safety; 12.2 Calibration and First Work

Zmorph Fab - QUICK START GUIDE 32
12. CNC milling

bit.ly/ZmorphFab_Manual

12.2 Calibration and rst work
12.1 Safety
Enter the ‘’ menu. Go to the ‘CHOOSE FILE’ sec-
tion.
Files uploaded to the internal
SD card are located in the

to the SD card are located in
the ‘EXTERNAL’ tab.

NOTE
If the user inserted the external SD card the screen should jump forward to the ‘CHOOSE FILE’ section
screen on the ‘EXTERNAL’ directory.
’ menu the screen will go directly to
the ‘CHOOSE FILE’ section.
NEW JOB MAINTENANCE
CHOOSE
FILE
PREHEAT
PRINTER
MOVE
BED
SETTINGS
STARTBACK CANCEL NEXT
EXTERNAL
INTERNAL
example.gcode
CNC milling