Zmorph FAB - 10.4 Manual Toolhead Change

zmorph3d.com 29
10.4 Manual Toolhead change
Single Extruder Toolhead 1.75
 Connect the ‘LEFT’ cable to the ‘LEFT’
frame socket and ‘RIGHT’ cable to the
‘RIGHT’ frame socket.
 Connect the extruder ‘A’ cable to the ‘A’
  
the X carriage
 Choose ‘MAINTENANCE’.
 Choose ‘CHANGE TOOL’.
 Choose ‘’.
 Choose ‘’.
 Choose ‘SINGLE EXTRUDER TOOLHEAD 1.75’.
Laser Toolhead
 Connect the ‘LEFT’ cable to the ‘LEFT’
frame socket and ‘RIGHT’ cable to the
‘RIGHT’ frame socket.
 Choose ‘MAINTENANCE’.
 Choose ‘CHANGE TOOL’.
 Choose ‘LASER’.
Thick Paste Extruder Toolhead
 Connect the ‘LEFT’ cable to the ‘LEFT’
frame socket.
 Connect the extruder ‘A’ cable to X car-
riage ‘A’ plug.
 Choose ‘MAINTENANCE’.
 Choose ‘CHANGE TOOL’.
 Choose ‘
 Choose ‘
Dual Extruder Toolhead
 Connect the ‘LEFT’ cable to the ‘LEFT’
frame socket and ‘RIGHT’ cable to the
‘RIGHT’ frame socket.
 Connect the extruder ‘A’ cable to the ‘A’
  
the X carriage.
 Choose ‘MAINTENANCE’.
 Choose ‘CHANGE TOOL’.
 Choose ‘’.
 Choose ‘’.
 Choose ‘DUAL EXTRUDER TOOLHEAD’.
CNC Milling Toolhead
 Connect the ‘LEFT’ cable to the ‘LEFT’
frame socket.
 Connect the extruder ‘A’ cable to X carriage
‘A’ plug.
 Choose ‘MAINTENANCE’.
 Choose ‘CHANGE TOOL’.
 Choose ‘CNC’.
Toolhead change