Zmorph FAB User Manual

Zmorph Fab - QUICK START GUIDE 8
Single Extruder
Toolhead 1.75
CNC Worktable
Protective
goggles
Plywood
Cleaning
needle
Cooling
fan
PrintaStick
adhesive
Milling
Toolhead
Laser
Toolhead
CNC cutter
3x CNC clamp
Spatula
8 mm
spanner
13 mm
spanner
Zmorph Fab
0,5 kg PLA
0,4 mm
nozzle
SD card
Power cord
Spool holderHeated worktable
4 x allen key
Adjustable
wrench
What’s in the box
Additional accesories:
       
       
with the machine and with already installed right
cover or it is possible to order it separately.
Zmorph Fab Custom
Zmorph Fab 3D Printer
Zmorph Fab All-in-One 3D Printer
Hepa filter system Right cover Screwdriver
3. What is in the box

Zmorph FAB Specifications

General

Build Volume	250 x 235 x 165 mm
Nozzle Diameter	0.4 mm
Filament Diameter	1.75 mm
Print Speed	up to 100 mm/s
Software	Voxelizer
Dimensions	530 x 555 x 480 mm
Layer Resolution	0.05 - 0.3 mm
Connectivity	USB, Ethernet
Supported Materials	PLA, ABS, PETG, TPU, Nylon
Power Supply	24V DC
Print Technology	Fused Filament Fabrication (FFF)
Extruder Type	Single Extruder
Display	5-inch capacitive touchscreen