Zmorph FAB User Manual

zmorph3d.com 43
16. Help and suppo
16.1 Suppo request
In concern for Zmorph Fab customers, our company provides technical support to solve the problems. In
case of problems with the machine or toolhead, review the troubleshooting suggestions in this instruction.





 Machine serial number.
 Firmware version of the machine.
 Error name if it occur in front LCD screen.
 
but it will help us to solve your problem faster.


Help and suppo

Zmorph FAB Specifications

General

Build Volume	250 x 235 x 165 mm
Nozzle Diameter	0.4 mm
Filament Diameter	1.75 mm
Print Speed	up to 100 mm/s
Software	Voxelizer
Dimensions	530 x 555 x 480 mm
Layer Resolution	0.05 - 0.3 mm
Connectivity	USB, Ethernet
Supported Materials	PLA, ABS, PETG, TPU, Nylon
Power Supply	24V DC
Print Technology	Fused Filament Fabrication (FFF)
Extruder Type	Single Extruder
Display	5-inch capacitive touchscreen