Zmorph FAB - 14.2 Calibration and First Work

Zmorph Fab - QUICK START GUIDE 40
14.2 Calibration and rst work
Enter the ‘’.    
and press ‘NEXT’ button.
Go to the ‘’ option.
 HOME X’ and
‘HOME Y
Do not press the ‘HOME Z’
button.
Go back to the ‘MOVE’ page.
NEW JOB MAINTENANCE
X Y Z
MOVE ZMOVE X Y
BACK SET
ZX
Y
HOME X HOME ZHOME Y
SET Y = 0 SET Z = 0
BACK MOVE
SET X = 0
CALIBRATE SETTINGSCHOOSE
FILE
STARTBACK
ZX
Y
HOME X HOME ZHOME Y
SET Y = 0 SET Z = 0
BACK MOVE
SET X = 0
CANCEL NEXT
EXTERNAL
INTERNAL
example.gcode
Go to the ‘SETTINGS’ option. 


CALIBRATE SETTINGSCHOOSE
FILE
STARTBACK
EXTRUDE PASTE
JOB SPEED
PARK
TOOL
BACK
5mm
Thick Paste Extruder
10mm 1mm