Zoom F1 User Manual

Connections
Attaching to a camera
Connecting the shock mount
This reduces noise when the is mounted on a digital SLR camera.
1.
Attach the ends of two arms from the shock mount to one belt loop on the .
2.
Attach the other arms to the other belt loop, one at a time.
Using the elasticity of the arms, attach their ends to the belt loops while bending them slightly.
1
2
Arms (2 each on left and right)
3.
Slide the shock mount onto the camera accessory shoe and tighten the screw to attach it.
20

Zoom F1 Specifications

General

Type	Field Recorder
Audio Formats	WAV, MP3
Max Sample Rate/Resolution	96 kHz / 24-Bit
Power	2 x AAA Batteries, USB Bus Power
Battery Life	Up to 10 hours
Simultaneous Recording Tracks	2
Built-In Microphone	No
Input Channels	2
Output Channels	1
USB	1 x Micro-USB
Recording Media	microSD/microSDHC cards (up to 32 GB)
Dimensions	64 x 79.8 x 34 mm
Display	Monochrome LCD
Line Input	1 x 1/8" (3.5 mm) TRS
Headphone Output	1 x 1/8" / 3.5 mm TRS
Microphone Input	1 x 1/8" (3.5 mm) TRS