Zoom F1 - Using as an Audio Interface

Using as an audio interface
input signals can be input directly to a computer, iOS device or other equipment, and playback signals on a
computer, iOS device or other equipment can be output from the
.
1.
Press or on the USB screen to select "Audio I/F", and press .
2.
Use or to select the type of device, and press .
NOTE
After selecting "iOS", turn the
power on, follow the instructions on screen, and disconnect the cable once.
Then, select "iOS" again and reconnect the cable.
3.
After selecting PC/Mac, use or to select the power source, and press .
The following power sources can be selected.
44