Zoom F1 User Manual

Adjusting connected equipment levels (playing test tones)
Use the test tone in order to adjust the level of a digital SLR camera or other device connected to the .
1.
Turn down the input gain of the other device.
NOTE
If the automatic gain control function on the other device is on, turn it o.
2.
Use an audio cable to connect the external mic jack of the other device with the PHONE OUT jack of the
.
3.
While pressing , press .
This plays a test tone from the PHONE OUT jack.
NOTE
Be mindful of the volume if you are monitoring the sound with headphones, for example.
HINT
The test tone is a 1kHz sine wave at -6 dBFS.
26

Zoom F1 Specifications

General

Type	Field Recorder
Audio Formats	WAV, MP3
Max Sample Rate/Resolution	96 kHz / 24-Bit
Power	2 x AAA Batteries, USB Bus Power
Battery Life	Up to 10 hours
Simultaneous Recording Tracks	2
Built-In Microphone	No
Input Channels	2
Output Channels	1
USB	1 x Micro-USB
Recording Media	microSD/microSDHC cards (up to 32 GB)
Dimensions	64 x 79.8 x 34 mm
Display	Monochrome LCD
Line Input	1 x 1/8" (3.5 mm) TRS
Headphone Output	1 x 1/8" / 3.5 mm TRS
Microphone Input	1 x 1/8" (3.5 mm) TRS