Zoom F1 User Manual

Updating the rmware
You can update the to the latest rmware version.
1.
Install new batteries in the (
→
"Using batteries") or connect the dedicated AC adapter (
→
"Using an AC
adapter").
NOTE
Executing a rmware update is not possible if the remaining battery power is low.
2.
Copy the rmware update le to the root directory on a microSD card.
HINT
Files for the latest rmware updates can be downloaded from the ZOOM website (www.zoom.co.jp).
3.
Insert the microSD card into the (
→
"Inserting microSD cards")
4.
While pressing , turn the power on.
5.
Use and to select "Update", and press .
NOTE
During the rmware update, do not turn the power o or remove the microSD card. Doing so could cause the
to become unstartable.
6.
After the rmware update completes, turn the power o.
69

Zoom F1 Specifications

General

Type	Field Recorder
Audio Formats	WAV, MP3
Max Sample Rate/Resolution	96 kHz / 24-Bit
Power	2 x AAA Batteries, USB Bus Power
Battery Life	Up to 10 hours
Simultaneous Recording Tracks	2
Built-In Microphone	No
Input Channels	2
Output Channels	1
USB	1 x Micro-USB
Recording Media	microSD/microSDHC cards (up to 32 GB)
Dimensions	64 x 79.8 x 34 mm
Display	Monochrome LCD
Line Input	1 x 1/8" (3.5 mm) TRS
Headphone Output	1 x 1/8" / 3.5 mm TRS
Microphone Input	1 x 1/8" (3.5 mm) TRS