Outputting tone signals when starting and stopping record-
ing (sound marker function)
Half-second tone signals (sound markers) can be played from the PHONE OUT jack when recording starts and
stops. Since sound markers are also written to les, when recording audio for video with the
, sending the
output signal to the camera input can make synchronizing audio and video easier.
1.
While pressing , press to open the MENU screen.
2.
Use and to select "Record/Play", and press .
3.
Use and to select "Sound Marker", and press .
4.
Use or to select "On", and press .
NOTE
Be careful of the volume if you are monitoring the sound with headphones, for example.
53
To Next Page
Loading...
