The System Log Page
You can use the System Log page to define how and where system logs will be
exported via syslog (UDP) or SMTP(TCP).
IP Address for Syslogging
Host IP address of the destination where the Sys log will be sent.
Click the Enable checkbox to set the IP Address as the destination.
E-mail alert settings
Check Enable if you want to send syslog via email.
SMTP Server IP and Port
Input the SMTP server IP and port; for example, mail.your_url.com or
192.168.2.100:26. If you do not specify a port number, the port value will be
set to 25.
SMTP Username and Password
Input the SMTP Username and Password.
E-mail addresses
The email address of each syslog recipient.
E-mail Subject
The subject of the email alert. This setting is optional.
62 Wireless-N Router User Manual