ZyXEL Communications IES-22A - Figure 46 Basic Setting, Xdsl Port Setup, VC Setup, Delete; Figure 47 Select Ports

Chapter 13 xDSL Port Setup
IES-708-22A User’s Guide
111
Select
Delete
Do the following to remove one or more PVCs.
1. Select a PVC’s Select radio button.
2. Click Delete.
3. Click OK if you want to remove the PVC from other ports. Click Cancel to
only remove the one you selected.
Figure 46 Basic Setting, xDSL Port Setup, VC Setup, Delete
4. If you clicked OK, the following screen appears.
5. Select to which ports you want to copy the settings. Use All to select every
port. Use None to clear all of the check boxes.
6. Click Apply to delete the channels.
Figure 47 Select Ports
Table 20 Basic Setting > xDSL Port Setup > VC Setup (continued)
LABEL DESCRIPTION