ZyXEL Communications IES-22A - IGMP Snoop Info Statistics Command; IGMP Group Statistics Command; IGMP Port Info Statistics Command

Chapter 48 IGMP Commands
IES-708-22A User’s Guide
308
48.7.1 IGMP Snoop Info Statistics Command
Syntax:
ras> statistics igmpsnoop info [clear]
This command displays the current IGMP settings and the number of IGMP-related packets
received. The following figure shows an example.
48.7.2 IGMP Group Statistics Command
Syntax:
ras> statistics igmpsnoop group [<vid> <mcast_ip>]
where
This command displays the information about IGMP groups learned on the system, specified
VLAN, or specified multicast address on the specified VLAN(s).
48.7.3 IGMP Port Info Statistics Command
Syntax:
ras> statistics igmpsnoop port info [<portlist> [clear]]
where
ras> statistics igmpsnoop info
IGMP Snooping/Proxy is Disable
number of query = 0
number of report = 0
number of leave = 0
number of groups = 0
<vid> =
The VLAN ID [1 – 4094].
<mcast_ip> =
The multicast IP address.
ras> statistics igmpsnoop group
[group info]
group vid port
--------------- ---- -------- --
<portlist> =
You can specify a single DSL port <1>, all DSL ports <*> or a
list of DSL ports <1,3,5>. You can also include a range of ports
<1,5,6~8>.
clear =
Clears the IGMP port info statistics on the specified ports.