Chapter 53 DSL Commands
IES-708-22A User’s Guide
339
An example is shown next.
In the list above, STUC refers to data detected by the STU-C, and STUR refers to data
detected by the STU-R. See Table 96 on page 338 for an explanation of these counters.
These counters are also used in the alarm profiles (see Section 53.3 on page 340).
53.2.6 DSL Port 1 Day Performance Command
Syntax:
ras> statistics shdsl 1dayperf <portlist>
where
This command displays line performance statistics for the current and previous four days.
ras> statistics shdsl 15mperf 1 2
Port 1 Current 15 Min elapsed time: 605 secs (Link Down)
Current 15 Min PM: STUC STUR
ES: 0 0
SES: 0 0
CRC: 0 0
LOSWS: 0 0
UAS: 0 0
History 15 Min PM-1: STUC STUR
ES: 0 0
SES: 0 0
CRC: 0 0
LOSWS: 0 0
UAS: 0 0
History 15 Min PM-2: STUC STUR
ES: 0 0
SES: 0 0
CRC: 0 0
LOSWS: 0 0
UAS: 0 0
<portlist> =
You can specify a single DSL port <1>, all DSL ports <*> or a
list of DSL ports <1,3,5>. You can also include a range of ports
<1,5,6~8>.
To Next Page
Loading...
