ZyXEL Communications IES-22A - Command Examples; Chapter 43 Command Examples; Command Examples Overview; Sys Commands

IES-708-22A User’s Guide
265
CHAPTER 43
Command Examples
This chapter gives some examples of commands.
43.1 Command Examples Overview
These are commands that you may use frequently in configuring and maintaining your IES-
708-22A. See Chapter 46 on page 285 for commands that deal with the IEEE 802.1Q Tagged
VLAN.
43.2 Sys Commands
These are the commonly used commands that belong to the sys (system) group of commands.
43.2.1 Log Show Command
Syntax:
ras> sys log show
This command displays the system error log. An example is shown next.
43.2.2 Log Clear Command
Syntax:
ras> sys log clear
This command clears the system error log.
" If you clear a log (using the log clear command), you cannot view it again.
ras> sys log show
1 Fri Jan 02 05:19:28 1970 1_Tell_P INFO Session Begin!
2 Thu Jan 01 02:17:49 1970 iw_app INFO Ether 1 Link Up(SN=4): 100/100!
3 Thu Jan 01 02:17:23 1970 iw_app WARN Ether 1 Link Down(SN=3)!