ZyXEL Communications IES-22A - PAE PVC Session Command; PAE PVC Counter Command

Chapter 54 Virtual Channel Management
IES-708-22A User’s Guide
364
54.6.4 PAE PVC Session Command
Syntax:
ras> shdsl paepvc session <portlist> [<vpi> <vci>]
where
This command displays the status of PPPoA-to-PPPoE PVC sessions on the specified port(s)
or PVCs.
The following example displays the settings for port 1.
54.6.5 PAE PVC Counter Command
Syntax:
ras> shdsl paepvc counter <portlist> [<vpi> <vci>]
where
This command displays statistics about PPPoA-to-PPPoE PVC activity.
<portlist> =
The port number of the PAE PVC. You can specify a single DSL
port <1>, all DSL ports <*> or a list of DSL ports <1,3,5>. You
can also include a range of ports <1,5,6~8>.
<vpi> =
The VPI of the PAE PVC.
<vci> =
The VCI of the PAE PVC.
ras> shdsl paepvc session 1
pvc 1-1/33
session state : down
session id : 0
session uptime: 0 secs
acname :
srvcname :
<portlist> =
The port number of the PAE PVC. You can specify a single DSL
port <1>, all DSL ports <*> or a list of DSL ports <1,3,5>. You
can also include a range of ports <1,5,6~8>.
<vpi> =
The VPI of the PAE PVC.
<vci> =
The VCI of the PAE PVC.