Chapter 54 Virtual Channel Management
IES-708-22A User’s Guide
365
The following example displays the statistics for port 1.
Each value is described below.
ras> shdsl paepvc counter 1
pvc 1-1/33
tx rx
---------------- ----------------
ppp lcp config-request : - 0
ppp lcp echo-request : - 0
ppp lcp echo-reply : - 0
pppoe padi : 0 -
pppoe pado : - 0
pppoe padr : 0 -
pppoe pads : - 0
pppoe padt : 0 0
pppoe srvcname error : - 0
pppoe ac system error : - 0
pppoe generic error : 0 0
tx/rx =
The values in these columns are for packets transmitted (tx) or
received (
rx) by the IES-708-22A.
ppp lcp config-
request
=
The number of config-request PDUs received by the IES-708-
22A from the CPE (client) device.
ppp lcp echo-
request
=
The number of echo-request PDUs received by the IES-708-
22A from the CPE (client) device.
ppp lcp echo-
reply
=
The number of echo-reply PDUs received by the IES-708-22A
from the CPE (client) device.
pppoe padi =
The number of padi PDUs sent by the IES-708-22A to the
BRAS.
pppoe pado =
The number of pado PDUs sent by the BRAS to the IES-708-
22A.
pppoe padr =
The number of padr PDUs sent by the IES-708-22A to the
BRAS.
pppoe pads =
The number of pads PDUs sent by the BRAS to the IES-708-
22A.
pppoe padt =
The number of padt PDUs sent and received by the IES-708-
22A.
pppoe srvcname
error
=
The number of service name errors; for example, the IES-708-
22A’s specified service is different than the BRAS’s setting.
To Next Page
Loading...
