ZyXEL Communications IES-22A - PPVC Show Command; PPVC Delete Command

Chapter 54 Virtual Channel Management
IES-708-22A User’s Guide
352
This command displays the PVCs that are members of a PPVC.
The following example displays the PVCs that are members of a PPVC for port 5.
54.4.5 PPVC Show Command
Syntax:
ras> shdsl ppvc show [<portlist> [<vpi> <vci>]]
where
This command displays the runtime configured PPVCs.
The following example displays the PPVCs configured on DSL port 5.
54.4.6 PPVC Delete Command
Syntax:
ras> shdsl ppvc delete <portlist> <vpi> <vci>
<member vpi> =
The VPI of the individual PVC that you are displaying.
<member vci> =
The VCI of the individual PVC that you are displaying.
ras> shdsl ppvc member show 5
port vpi vci mvpi mvci level DS/US vcprofile
---- --- ----- ---- ----- ------ --------------------
5 8 35 8 36 2 DEFVAL/DEFVAL
<portlist> =
The port(s) of the PPVC.
You can specify a single DSL port <1>, all DSL ports <*> or a
list of DSL ports <1,3,5>. You can also include a range of ports
<1,5,6~8>.
<vpi> =
The VPI of the PPVC.
<vci> =
The VCI of the PPVC.
ras> shdsl ppvc show 5
port vpi vci encap pvid pri
================================
5 8 35 llc 25 6