ZyXEL Communications IES-22A - Figure 21 VC Setup; Figure 22 VC Setup

Chapter 5 Initial Configuration
IES-708-22A User’s Guide
68
Figure 21 VC Setup
10 Select Super Channel to allow the channel to forward frames belonging to multiple
VLAN groups (that are not assigned to other channels). Then, enter the VPI and VCI that
you use. Leave the other default settings, and click Add. The VC Setup screen is
updated.
Figure 22 VC Setup
11 Select the new channel’s Select radio button. Click Copy, and then click Paste. The
following screen appears. The following screen appears.